Yes, as long as you screw it into a stud or brick, not drywall alone. This plate is 1.8 lb of metal, 15.7 in wide and 5.7 in deep, and it holds drivers, pliers, wrenches and a drill through six hole sizes. The plate carries the weight; the wall anchors carry the plate. That plate is the Wall-Mount Power Tool Organizer.
I rent a garage and can't drill big holes. How do I mount this without wrecking the wall?
Renters ask me this one a lot. The honest answer: this organizer needs screws, so you want the smallest footprint that still holds. Here is how I'd do it.
- Find one stud with a stud finder, or pick a brick face if your garage has one. One stud is enough — the plate is 1.8 lb empty, so no extra bracing needed.
- Mark two screw points level with each other. A 15.7 in wide plate shows tilt fast, so check with a level before driving anything.
- Use the smallest screws that bite, and fill the holes with spackle when you move out. Two small holes beat a shelf's worth of anchors.
- Load the plate first, hooks second. Six hole sizes — 0.27, 0.39, 0.59, 0.67, 0.78 and 0.82 in — mean each tool drops into a hole that actually grips it.
- Hang longer pieces on the hook rail underneath. Two levels on one patch of wall keeps everything within arm's reach instead of in a drawer.
If your lease bans drilling entirely, this isn't the product for you. I'd rather say that than sell you a plate you can't hang.
Plate organizer or a rolling tool chest — which one should I get?
They solve different problems, so it depends on your space.
Go with the wall plate if your workbench is the problem. It's 1.8 in off the wall when folded, so it barely leans into the space you walk past every day. That matters in a one-car garage where floor space is gone. It also suits anyone who wants tools visible at eye level — a drill here, pliers somewhere under a rag, and the first ten minutes of every job spent looking for things. That was my workbench before I hung this.
Go with a chest if you need to move tools between rooms, or if you store things bigger than a drill. A chest holds bulky items and rolls; this plate does not. It also won't help if you have no free wall at all.
One more honest note: the maker does not recommend hanging anything heavier than the holes are sized for, so treat the six hole sizes as the limit, not a suggestion. Match the tool to the hole.
Quick takeaways
- Mount into a stud or brick. The plate is 1.8 lb of metal, and drywall alone won't carry a loaded drill.
- Six hole sizes from 0.27 to 0.82 in, plus a hook rail below, give you two storage levels in a 15.7 x 5.7 in footprint.
- Folds to a 1.8 in profile, so it fits narrow garages where a chest would block the walkway.
Q: Can a wall plate hold heavy power tools?
A: Yes, if it's screwed into a stud or brick. This one is 1.8 lb of metal and takes tools through six hole sizes, with a hook rail underneath for longer pieces.
Q: I rent a garage and can't drill big holes. How do I mount this without wrecking the wall?
A: Use one stud and two small screws, level the 15.7 in plate before driving them, and spackle the holes when you leave. If your lease bans drilling completely, skip this product.
Q: Plate organizer or a rolling tool chest — which one should I get?
A: Pick the plate if you have wall space and want tools at eye level; it folds to 1.8 in and keeps the floor clear. Pick a chest if you need to move tools around or store items bigger than a drill.